Frick by Johnson Controls

Evaporator Coils

Evaporator Coils

At Johnson Controls, our AGHN Traditional Unit Cooler Evaporator from Frick features advanced technology with low-noise fan blades that simultaneously maximize capacity and minimize energy consumption. This induced draft unit cooler evaporator has been designed to operate with the most efficiency, specifically with the hygienic needs of the market in mind. Not only that, but Frick also provides you with excellent cost savings and simplicity in installation with this accessible Traditional Unit Cooler Evaporator.

Features and Benefits

  • Ziehl-Abegg fan technology delivers full air volume across the coil surface to maximize efficiency while providing very low sound levels.
  • Cleaning is made simple; Hinged fans swing away providing easy access to clean the coil.
  • Evaporators can be circuited for all refrigerant applications including DX feed, flooded operation, Liquid Recirculation Overfeed, Control Pressure feed as well secondary coolants such as water and glycols.
  • Standard coil materials are made from 304 stainless steel tubes, and aluminum fins. All fins are manufactured with a continuous fin sheet in order to reduce the risk of frost build up, air-side pressure drops, dust, dirt and bacteria – simplifying any cleaning procedure.
  • Horizontal headers with no orifices defrost quickly. Since there are no orifices, the tubes are "open channels" and drain quickly.
  • Epoxy coated fins are available when there is a need to cool corrosive environments.
  • Sloped design of the drain pan for all models ensures maximum and efficient drainage during defrost cycle.
  • All drain pans come in our unique “fold down" design and can be either folded down or completely removed for cleaning purposes.
  • The Guntner streamer can increase the air throw by +/- double - requiring less evaporators to be installed. There is virtually no additional air pressure drop nor increase in fan horse power resulting from the addition of the streamer.

Condensing Units

RXF Frick® Compressor Packages

At Johnson Controls, we manufacture Frick® Compressors to help you get the most out of your industrial chiller system. The Frick® RXF Rotary Screw Compressor features advanced technology and inherent reliability in its simplicity. Fewer moving parts and simple rotary motion means less maintenance, lower noise and vibration levels, and of course, lower total repair costs, saving you money time and time again.  With dependability proven in thousands of installations, RXF Frick® Compressor Packages operate with the most energy efficiency possible.

Features and Benefits

  • Package comes with Frick® XJF Rotary Screw Compressor
  • 5+7 rotor design for the strongest, most efficient operation
  • Continuous capacity control precisely matches load requirements
  • Variable volume ratio control reduces power consumption
  • Quantum™ HD Controller for worry free operation
  • Flange-Mounted Motors eliminate the need for coupling alignment
  • Cold-Start™ Valve ensures a quick start at any condition
  • SuperFilter II keeps your oil clean
  • Antifriction Bearings provide the highest reliability available
  • All components are mounted and wired in an industrial quality package
  • Optional Vyper™ Variable Speed Drive for exceptional efficiency
RWF II Frick® Compressor Packages

We engineer the world’s best industrial refrigeration compressors at Johnson Controls, like the Frick® RWF II Compressor Package, which features rotor designs that provide the strongest, most efficient operation for their applications. These Frick compressors are designed for use with ammonia, halocarbon, and hydrocarbon refrigerants. The easily manageable, compact package gives you more space and lowers construction costs to save you money. Manufactured to meet your specific requirements, the RWF II Frick® Compressor Package is reliable, accessible and easy to service.

Features and Benefits

  • Package includes Frick® SGC Rotary Screw Compressor
  • 4+6 rotor design for the strongest, most efficient operation
  • Continuous capacity control precisely matches load requirements
  • Variable volume ratio control reduces power consumption
  • Quantum™ HD Controller for worry free operation
  • Flange-Mounted Motors eliminate the need for coupling alignment
  • Cold-Start™ Valve ensures a quick start at any condition
  • SuperFilter II keeps your oil clean
  • Antifriction Bearings provide the highest reliability available
  • All components mounted and wired in an industrial quality package
  • Optional Vyper™ Variable Speed Drive for exceptional efficiency
Frick® Bare Screw Compressors

At Johnson Controls, we engineer reliable gas compressors for custom packagers and system integrators to use in their critical processing applications. The Frick® SGC, SGCH & SGCB bare screw compressors are designed to compress a variety of gases for quality solutions in refrigeration, water chilling, wellhead compression, gas gathering, and vapor recovery.

With 38 models ranging from 71 CFM to 5067 CFM, our gas compressors are available for almost every industrial refrigeration need.

Features and Benefits

  • Stepless Capacity Control
  • Variable Volume Ratio
  • Antifriction Bearings
  • Wide variety of Drive and Motor Arrangements
  • Oil Injection Lubrication and Cooling
  • Internal Oil Passages
  • Made in the USA
Frick® PowerPac™ Industrial Refrigeration Chiller

Our complete solution for industrial refrigeration applications, Frick® PowerPac™ Chillers are self-contained chilling systems that provide effective solutions and feature the highest quality components. These packaged chillers reduce the need for field labor and put advanced technology to work for a lower refrigerant change and better operating efficiency. Frick® compressors, heat exchangers, evaporators, and condensers are combined to form a compact package controlled by turnkey software. Reduce your footprint and preserve valuable space with a packaged chiller system like PowerPac™.

Features and Benefits

  • 3 Year Warranty - when installed by a factory-authorized Frick® Factor start-up technician
  • Quality Components - including Frick® Rotary Screw Compressors with variable speed drive technology and LaZerWeld Plate Heat Exchangers
  • Low Refrigerant Charge - reduced refrigerant charges up to 75%
  • Compact Footprint - requires up to 50% less space to install
  • Reduced Liability - protect people and products while reducing insurance costs
  • Easy Portability - moves with your business saving time and money
  • Full Product Line - a wide range of sizes to meet your refrigeration application needs
Frick® SmartPac™ Heat Pumps

Our Frick® SmartPac™ Heat Pumps provide a complete packaged solution that enables you to reduce water-heating costs in your ammonia refrigeration facility while upgrading it in an environmentally friendly way. Packaged heat pumps like these allow you to leave a smaller carbon footprint while saving money and operating your facility more efficiently.

Features and Benefits

  • Quality Components
  • Compact Footprint
  • Easy Portability
  • Full Product Line
  • 3 Year Warranty – when installed by a factory-authorized Frick® start-up technician
Frick® XLP2 Evaporative Condenser

Our XLP2 Evaporative Condensers are forced draft style industrial condensers that combine low energy consumption with easy maintenance access for a one-of-a-kind cooling system. This super-efficient evaporative condenser minimizes energy consumption by providing lower condensing temperatures through high efficiency, low horsepower axial fans. At Frick®, owners of our XLP2 Evaporative Condensers enjoy not only saving money, but also conserving natural resources and reducing their overall environmental impact. It’s easy to access the interior unit for simple adjusting, cleaning and flushing, too.

Features and Benefits

  • Forced draft style condenser; energy saving model
  • Superior corrosion protection
  • HDGAF coil assembly
  • TripleGuardTM (option) 5-year warranty basin
  • Full-size hinged access doors
  • Premium efficient VFD motors
  • Independent drive system
  • International Building Code (IBC) compliant
  • Easy assembly